Laminar Air Flow (Quantity Required: 1 Piece) Tender, Assam - 80257419

Procurement Summary

State : Assam

Summary : Laminar Air Flow (Quantity Required: 1 Piece)

Deadline : 03 Apr 2023

Other Information

Notice Type : Tender

TOT Ref.No.: 80257419

Document Ref. No. : GEM/2023/B/3261428

Financier : Self Financed

Purchaser Ownership : Public

Document Fees : Refer Document

Tender Value : Refer Document

EMD : Refer Document

Purchaser's Detail

Name :Login to see tender_details

Address : Login to see tender_details

Email : Login to see tender_details

Login to see details

Tender Details

Item Description: Cleanliness should be ISO Class 5 as per ISO 14644-1, Working Size in Ft wxdxh 2x2x2, Should have Horizontal direction of Flow, Particle Retention should be 0.3 Micron and Above, Noise Level should be 65 decibel on A scale plus or minus 5, Velocity should be 90 Feet per Minute plus-minus 20, Worktable should be By IS 304 Grade Stainless Steel surface, Front door should be by 4 mm thick Polycarbonate Foldable Type, Side Panel should be by 4 mm thick Polycarbonate Sheet panel, Should have PHILIPS UV lamp, Should have LED Tube Fittings Illumination, Pressure should be Inclined Manometer 0 to 25 mm range, Other accessories 5 by 15 Amp power point, Gas inlet, Castor Wheels and Power chord, Power Supply 230V, Single phase, 50 Hz HEPA Filter should be as mentioned below Media Ultra clean glass fibre paper, Type Mini Pleat HEPA Filter, Separator less, Retention 0.3 Micron with a max. 25mm WG, Efficiency 99.99 percent, Grade H13 rating
PRE Filter should be as mentioned below Media Synthetic, non-woven polyester fibres Casing GI with PU coated frame, Retention 5 Micron and above, Efficiency 95 percent, Material of Construction The Cabinet should be made from Galvanized Iron 18 SWG sheet metal with polyurethane paint coated finish and bottom should be supported with MS with PU coated stand, Blower Assembly system should have Outer rotor type blower system, which consists of dynamically and statically balanced aluminium centrifugal impeller driven by a single phase, 1440-RPM motor, enclosed in an PU coated GI casing suitably connected to the chamber through direct molded type, warranty 1 year with 2 years AMC, The vendor should have established service Center within 200-500 km of the institute and should submit the verifiable contact no of the local service person with address, The vendor must have supplied atleast 50 instruments in institute of repute within the state of Assam. The vendor must share the installation list of instruments supplied in Assam.

Item Title: Laminar Air Flow
Item Quantity: 1
Unit of Measure: Piece
Delivery Period (In number of days): 60
Start Date: 13-03-2023 8:12 PM
End Date: 03-04-2023 9:00 PM

Documents

 Tender Notice

Bid_Document_4565169.pdf

Specification_Document.pdf

BOQ_Document.csv