Supply of 3D DIC System: Capable to Perform 3 Camera and 2 Camera at Jammu Tender

Procurement Summary

State : Jammu and Kashmir

Summary : Supply of 3D DIC System: Capable to Perform 3 Camera and 2 Camera at Jammu

Deadline : 20 Jan 2025

Other Information

Notice Type : Tender

TOT Ref.No.: 112827092

Document Ref. No. : IITJMU/ME/SP-43/2024-25

Competition : NCB

Financier : Self Financed

Purchaser Ownership : Public

Document Fees : Refer Document

Tender Value : Refer Document

EMD : ₹ 140000

Purchaser's Detail

Name :Login to see tender_details

Address : Login to see tender_details

Email : Login to see tender_details

Login to see details

Tender Details

Tenders are invited for Supply of 3D DIC System: Capable to Perform 3 Camera and 2 Camera at Jammu Components Required : 2.1 Cameras: The DIC system shall be supplied with following USB3 CMOS cameras:  12.3 MP @ 30 fps/Hz or better (Qty: 3 Nos.)  2.3 MP @ 200 fps/Hz or better (Qty: 2 Nos.) 2.2 Lenses: The DIC system shall be supplied with the following lenses:  Lens A: High quality C-mount, 16 mm, compatable with cameras, MOD: 100 mm (Qty: 3 Nos.)  Lens B: High quality C-mount, 50 mm, compatable with cameras, MOD: 300 mm (Qty: 3 Nos.)  Lens C: High quality C-Mount, f = 25mm, Sensor Size: 2/3", MOD: 250 mm (Qty: 2 Nos.) Field-of-View (FoV) chart must be supplied for the offered lenses, indicating the achievable FoV with respect to Distance-to-Object (DtO). 2.3 Set of C-mount distance rings consisting 0.5mm, 1mm, 5mm, 10mm, 20mm and 40mm rings should be provided. The rings may be combined to extend the minimum operating distance of the lens. (Qty: 3 Nos.) 2.4 High Power LED illumination system should be supplied with illumination control. (Qty: 2 Nos.) 2.5 Heavy Duty Tripod with head and mounting sets for 3 camera DIC and two light sources. (Qty: 1 Nos.) 2.6 The DIC system shall be supplied with the following calibration targets:  10 mm, 30 mm high precision ceramic based calibration target. (Qty: 1 Nos. each)  100 mm, 150 mm, 200 mm high precision double sided calibration target. (Qty: 1 Nos. each)  350 mm high precision plastic calibration target. (Qty: 1 Nos.) 2.7 The DIC system shall be supplied with the following mounting rail & brackets:  The supplied DIC system must include one 70 cm mounting rail with two or three slider brackets for the assembly of up to three cameras. A measurement ruler for adjustment of the stereo-rig baseline shall be implemented.  A set of mounting rail extension arms should be included in the system that allows the user the possibility to extend the baseline length and orientation of the outer cameras (for a 3-camera setup).

Documents

 Tender Notice