Contract notice: Construction work Tender, Germany - 34301455

Procurement Summary

Country : Germany

Summary : Contract notice: Construction work

Deadline : 26 Jul 2019

Other Information

Notice Type : Tender

TOT Ref.No.: 34301455

Document Ref. No. : 303958-2019

Competition : ICB

Financier : Self Financed

Purchaser Ownership : -

Tender Value : Refer Document

Purchaser's Detail

Name :Login to see tender_details

Address : Login to see tender_details

Email : Login to see tender_details

Login to see details

Tender Details

Object of the contract
Construction work

Description: Contract notice: Construction work

Authority Type: Utilities entity
Contact Nature: Works
Procedure: Negotiated procedure
Document: Contract notice
Regulation: European Union
Award criteria: The most economic tender
CPV code: 45000000, 45000000
CPV Description: Construction work.

TEAG campus, new building modules 1 2, 1st BA " Lot 35: Building Automation

Reference Number: TEAG MD6 072019

The TEAG Thueringer Energie AG plans to expand the main administration of its headquarters in Schwerborner Strasse in the state capital of Erfurt into a TEAG Campus.

Main Site: TEAG Thueringer Energie AG

Technical Details:

- NGF approx. 7, 800 m,

- BGFapprox. 9 000 m,

- BRI approx. 37 300 m,

- floor height EC: 4.50 m,

- storey height 1st - 3rd floor: 3.60 m,

- roof central (technology): 3.60 m.

The technical requirements of the individual works to be regulated by the building automation are listed below:

Heating:

The heat transfer on the upper floors takes place with concrete core activation and, for better controllabilityt of the rooms, with activated ceiling sails and activated plasterboard ceilings. These are connected to thermal sockets. Both systems are supplied via distributors in the corridor zones. In addition, a door air curtain system as well as underfloor heating are planned.

Sanitaer:

Each module will be adjoined to the staircase core by building 3 adjacent, almost identical WC areastet. On the ground floor, a sanitary area is realized in the connector between the modules, assigned to the conference area. For commercial workplaces in module 2, a small changing / washing and shower area is planned. In addition, a cafeteria kitchen will be set up in Module 1.

Ventilation technology:

Two meeting rooms will be waiting in the nearly identical upper floorse, 2 tea kitchens, 2 sanitary areas, 4 copy rooms and 2 internal technical rooms. On the ground floor, 2 further sanitary areas, 4 conference rooms and some internal rooms are mechanically ventilated. For the supply of the aforementioned premises, two central ventilation units are installed on the roof. A separately constructed kitchen inlet and exhaust air unit supply the preparation unit and exhaust aird Spueling area with supply and exhaust air. Supply and exhaust air are distributed via walkable, nearby vertical shafts into the projectiles. Centrifugal fans are RLT unit module 1: 12 500 m / h, RLT unit module 2: 8 000 m / ho Air treatment functions: filtering, heating, cooling, heat recovery (cross flow) and kitchen ventilation unit Total exhaust air volume 2 000 m / h, filtering, heating, heat recovery (KVS) as well60 volume flow controllers and 30 fire dampers

Decentralized refrigeration technology:

Decentralized refrigeration technology is mainly used to supply technical rooms. These are 6 rooms with approx. 30 kW refrigeration capacity. In addition, the conference rooms in the EC will be equipped for peak load coverage with VRV-Kaelte. VRV outdoor unit 1 with 30 kW refrigeration capacity, connection of 6 technical rooms in 2-Leitersystem, supply the rooms with circulating air Wandkuehlgeraeten. VRV outdoor unit 2 with approx. 20 kW refrigeration capacity, connection of 4 conference rooms, cold storage with circulating air ducts or inside ceiling units.

Service content building automation:

General:

- cable pull on existing as well as new cableway,

- installation of cable rack systems,

- terminals of field devices (sensors / act

- Setting up a new building control system

- Connecting the various controllers to the building control system (creating system graphics)

- For communication on the automation level, the protocol BACnet-IP should be used



For communication between the automation and management level, the protocol BACnet-IP should be used.

Heating / Cooling:

- Installation ei

Control cabinet in the service room,

- Connecting the heating circuits to the Bacnet-DDC,

- Room control units for manual setpoint selection in the meeting rooms and social areas,

- Setting up a coupling for decentralized Kaelteerzeugung.

Sanitaer:

- In the shower area are motion detectors as well Moisture sensor for selective venting.

Ventilation:

- InstallationControl cabinet for each ventilation unit in the technical connection room or directly on the ventilation unit

- Connecting the units to the Bacnet DDC.

Setting up a fire damper bus system

Counter:

- Media consumption counters must be executed as M-Bus counters and wired up to the building management system.

Planned Service period: 7.11.2019 to 26.6.2020.

With the participation application are theto submit the following required information / documents. For consortia, this applies to the individual members of the consortium.

A) Bidder consortia must, with their application, list the individual members of the consortium, authorize a member in writing as representative and declare that the authorized representative is entitled to remove the bidderRepresent the Community to the contracting authority and act unrestrictedly on behalf of all consortium members within the framework of the procurement procedure. b) Insofar as the candidate intends to have individual services carried out by subcontractors, this must be indicated in the application and by a binding declaration by the intended subcontractor to prove who he is(c) To assess the personal situation, the following must be provided:

- current extract from the commercial register or professional register (not older than six months, one copy sufficient, for foreign applicants: equivalent certificate of a judicial or administrative authority with official approval) recognized translation), - current exemption certificate of the Finanzamtes or equivalent (not older than 6 months),

- Certificate of immunity from the responsible social insurer or equivalent (not older than 6 months), - up to date proof of membership in the professional association or equivalent (not older than 6 months), proof of Liability insurance coverage with industry-standard conditions or equivalent (not aelwritten confirmation of the applicant that there are no grounds for exclusion under -- 123, 124 GWB with respect to his company.

The following information / documents must be submitted with the application to participate. For consortia, this applies to the individual members of the consortium.

Information and formalities that are required:

- Specification of the Umthe enterprise for the past 3 completed years, in so far as it relates to works or other services which are comparable to the services to be provided, including the share of contracts carried out jointly with other undertakings, the number in the last 3 completed business years annual full-time employmentefte, broken down by profession.

Announcement ID: CxP4YR2Y1JN


Internet address (URL): www.teag.de

Documents

 Tender Notice