CLEAR CAMBODIA has floated a tender for Digging Water Wells and Corn Buckets. The project location is Cambodia and the tender is closing on 27 Feb 2024. The tender notice number is , while the TOT Ref Number is 96939266. Bidders can have further information about the Tender and can request the complete Tender document by Registering on the site.

Expired Tender

Procurement Summary

Country : Cambodia

Summary : Digging Water Wells and Corn Buckets

Deadline : 27 Feb 2024

Other Information

Notice Type : Tender

TOT Ref.No.: 96939266

Document Ref. No. :

Competition : ICB

Financier : Other Funding Agencies

Purchaser Ownership : Public

Tender Value : Refer Document

Purchaser's Detail

Name :Login to see tender_details

Address : Login to see tender_details

Email : Login to see tender_details

Login to see details

Tender Details

Tenders are invited for Digging Water Wells and Corn Buckets.

Well

· Clean Cambodia Needs to Recruit 20 Well Diggers in Choam Ksan and Kulen Districts of Preah Vihear Province with the Same Size below:

· Pump Head Made in India with a Set of Accessories

· Pour Concrete 3 Meters x 3 Meters around the Well and have a Drainage System 3 Meters Long and 25 Cm Thick, Light and Water Resistant. No Idea

· Uses 114 Mm Thick Plastic Tube and 8.5 Bar Resistance

· Pump Wells with a Depth of 50 Meters to 70 Meters

· Pour Concrete around to Prevent Leakage and Waterproofing over 3 Meters

· Test the Asian Water for each Well with a Clear Report

· Pumping Water Per Hour from 1.5 to 3 Cubic Meters

· Dig a Well and Finish in 5 Days

· All Wells Need Disinfectant

· Construction of Water Storage Pit (1m x 1m x 1m Brick with Concrete Cover, Closed Pit and with Steel Piercing in the Middle for Holding Open)

Owns a Container-Pot Craft:

· Material: Steel Barrel with Full Thickness (0.5 Mm)

· Length, Height, Diameter 23.50 Cm

· Upper Mouth Length 29 Cm (inside) and 34 Cm (outside)

· Bottom Length below the Radiator 27.50 Cm

· Length of Height of Cover 3 Cm

· Length above Cover 39.40 Cm (Length) and 37.30 Cm (Width)

· There is a Handle on the Top Cover and the inside Bottom of the Emitter.

· There are 100 Small Holes in the Bottom of the Diffuser (Hole Size 3 Mm and the Distance from One Hole to Another Hole Length of 2.50 Cm

[Disclaimer: The below text is machine translated. For accurate information kindly refer the above text in original language.]

Documents

 Tender Notice