Procurement Summary
Country : USA
Summary : Maintenance, Repair, and Preservation of TWR7&8
Deadline : 31 Jan 2025
Other Information
Notice Type : Tender
TOT Ref.No.: 113282966
Document Ref. No. : N4523A25R1052
Competition : ICB
Financier : Self Financed
Purchaser Ownership : Public
Tender Value : Refer Document
Purchaser's Detail
Name :Login to see tender_details
Address : Login to see tender_details
Email : Login to see tender_details
Login to see detailsTender Details
Description
TWR-7
Length: 85 FT
Width: 21 FT 6 IN
Age: 16 YRS
Hull Type: Aluminum
Draft: 5 FT 8 IN
Full Displacement: 95 Tons
Light Load: 60 Tons
Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officer-s Representative (COR) to have vessel delivered to the Contractor-s facility. Upon docking vessel, wash, and clean vessel. Remove all fendering and sweep blast clean and replace any broken or missing studs and related hardware, as well as doubler plating. Sweep blast and touch up underwater hull. Remove and Install new FWD escape hatches and gaskets. Open, clean and inspect all tanks and voids including fuel, CHT and potable water tanks. Touch up preservation of main deck and bulwarks and pilot house. Install new multi-cable penetrations in the pilot house overhead. Accomplish overhaul of bow thruster and related testing. Overhaul hydraulic steering rams and related testing. Remove, clean and inspect shafts and reinstall with new seals and bearings and accomplish related testing. Replace legacy low pressure air compressor and related piping system. Replace HVAC system and related piping. Clean and inspect main engine heat exchangers. Overhaul and test genset alternators. Flush, clean and inspect chill water piping. Replace hull valves with new. Undock the vessel. Conduct Sea trials. Arrange and coordinate the delivery of the vessel back to the Government with the Contracting Officer via the COR.
TWR-8
Length: 85 FT
Width: 21 FT 6 IN
Age: 16 YRS
Hull Type: Aluminum
Draft: 5 FT 8 IN
Full Displacement: 95 Tons
Light Load: 60 Tons
Scope Overview: Coordinate with the Contracting Officer, via the Contracting Officer-s Representative (COR) to deliver the vessel to the Contractor-s facility. Upon docking vessel, wash, and clean vessel. Remove all fendering and sweep blast clean and replace any broken or missing studs and related hardware, as well as doubler plating. Sweep blas...
Active Contract Opportunity
Notice ID : N4523A25R1052
Related Notice
Department/Ind. Agency : DEPT OF DEFENSE
Sub-tier : DEPT OF THE NAVY
Major Command : NAVSEA
Sub Command : NAVSEA SHIPYARD
Office: PUGET SOUND NAVAL SHIPYARD IMF
General Information
Contract Opportunity Type: Presolicitation (Updated)
Updated Published Date: Jan 16, 2025 02:17 pm PST
Original Published Date: Jan 16, 2025 02:15 pm PST
Updated Response Date: Jan 31, 2025 12:00 pm PST
Original Response Date: Jan 31, 2025 12:00 pm PST
Inactive Policy: 15 days after response date
Updated Inactive Date: Feb 15, 2025
Original Inactive Date: Feb 15, 2025
Initiative: None
Classification
Original Set Aside: Total Small Business Set-Aside (FAR 19.5)
Product Service Code: J019 - MAINT/REPAIR/REBUILD OF EQUIPMENT- SHIPS, SMALL CRAFT, PONTOONS, AND FLOATING DOCKS
NAICS Code: 336611 - Ship Building and Repairing
Place of Performance: WA USA
Documents
Tender Notice
A5-N4523A25R1052_TWR-7-SOW-011625-DRAFT.pdf
A5-N4523A25R1052_TWR-8-SOW-011625-DRAFT.pdf