Medical Consumables for Intensive Care Tender, Macedonia - 95724977

Procurement Summary

Country : Macedonia

Summary : Medical Consumables for Intensive Care

Deadline : 26 Jan 2024

Other Information

Notice Type : Tender

TOT Ref.No.: 95724977

Document Ref. No. : 21996/2023

Competition : ICB

Financier : Self Financed

Purchaser Ownership : Public

Tender Value : Refer Document

Purchaser's Detail

Name :Login to see tender_details

Address : Login to see tender_details

Email : Login to see tender_details

Login to see details

Tender Details

part 1 Closed aspiration system made of PVC with a protective nylon bag consisting of an aspiration catheter, a connector valve with the possibility of opening and closing the system and replacement time min. 72 hours 12 SH Length min. 580 mm The system must have a port for flushing and a port for aerosol therapy, eel 2 Closed system for aspiration made of PVC with a protective nylon bag consisting of an aspiration catheter, a connector valve with the possibility of opening and closing the system and replacement time min. 72 hours 14 SH. Length min. 580 mm. The system must have a port for flushing and port for aerosol therapy, part3 Intubation stylet constructed of soft aluminum coated with soft plastic. Stylet to have a soft atraumatic tip and smooth sliding surface. Length of 350 mm. Size compatible with an endotracheal tube with an internal diameter of 2.5-4.5 mm., Section 4 Oxygen mask made of soft vinyl with hosefor oxygen with a length of min. 200 cm for adults, with flow 5-10 LPM, Part 5 O2 mask with a bag for high concentration of O2 made of soft vinyl, flow 5-10 LPM, with a mandatory valve to prevent loss of gas and oxygen hose with a length of min. 210 cm with a standard size, Part 6 Nasal masksfor O2 adults made of disposable PVC, Part 7 Inhalation masks for adults made of disposable PVC, part 8 Filter for filtration with HEM mechanical with filtration percentage min. 99.9999% for bacteria and viruses certified and validated in independent anti-HIV laboratory, anti Hep.B and Hep.C with low flow resistance up to max. 1.1 cm x 20 at a flow of 30 l/min. and amount of wetting 34-36mg x20/L at W=500 ml. Compatible with PB760/840 fan model. or equivalent, part 9 Filter for filtering mechanical without HEM with filtration percentage min. 99.9999% for bacteriarii and viruses certified and validated in an independent laboratory - anti-HIV, anti-Hep.B and Hep.C with low flow resistance up to max. 0.8 cm x 20 at a flow of 30 l/min. and amount of moistening max. 22mg x 20/L at W=500ml. Compatible with PB760/840 fan model or equivalent, Part 10 Hydrophobni filters for suction device model Vaculine maxi surgical or equivalent, part 11 Whip hose with connection for suction device model Vaculine maxi surgical or equivalent, part 12 Expiratory block for device for mechanical ventilation with a maximum volume of 14cm3 and the possibility of use up to a minimumm 3 sterilizations, part 13 Disposable mechanical ventilation machine hose consisting of 2 hoses with smooth inner surface and Y connector with CO2 ports, sterile for adults, with inner diameter 22mm and port connection 22M/15F. Hose length 150-180cm, part 14 Hose for machinefor single-use mechanical ventilation, sterile for adults, compatible with Prizma Vento 50 ventilator or equivalent, part 15 SPO2 Sensor for monitors Contec 6000 or equivalent, part 16 Expiratory valve for single use - compatible with V-family respirator from the manufacturerDreger Germany or equivalent (the valve should have a silicone membrane, hose connection part, flow sensor connection and condensation cup, all made of RR-polypropylene. It should have an expiratory resistance that is 2 mbar for 60 l/min, air pressure from min. 570 to 1100hpa and relative humidity of min.5-95%), part 17 disposable hoses with exhalation valve with smooth inner surface and consist of two hoses 160-180cm and y connector with co2 port and port with and proximal pressure hose compatible with the device for mechanical ventilation, part 18 electrodes for ecgwith dim.min 32x40 mm, part 19 clips for ecg device 1/4 set standard, part 20 pumps for ecg device 1/6 set standard, part 21 plastic tray with smoke 30*20, part 22 plastic tray with smoke 70*50, part 23 pvc container for medical waste min 1.5 l to max. 2.0 l.-, part 24 pvc container for medical waste min 2.5 l to max. 3.5 l.-, part 25 plastic container with four compartments with dimensions 270x180x41 mm. and permitted size deviation of / - 10% made of high-quality polypropylene, subjected to sterilization at 134 c, part 26 kidney container 500ml with permitted deviation of - 10% of the volume, chestiran, made of high-quality polypropylene subjected to sterilization., part 27 container for physiological secretions for adults with a handle and lid, made of polypropylene, comfortable and easy to clean with dimensions 449x309x99mm and a permissible size deviation of / - 10 %, part 28 container for physiological effectsboxes for adults, made of polypropylene, comfortable and easy to clean with dimensions 449x309x99mm and a permissible size deviation of / - 10%, part 29 box for medical waste format: 215x170x155 mm folded paper type: recycled paper 100%, triple-layer microwave double-sided brown, 380g/m2 print: flexo print in two colors, yellow and black, environmentally friendly water-based paints finishing: stamping and gluing in one place. color: yellow to be made according to the standard fsc -std- 40-004- v2-1, part 31 medical examination roll for bed with a width of 60cm x 50m made of paper and nylon, waterproofa, part 31 medical examination roll for bedside 60cm x 50m width made of paper and nylon, impermeable, part 32 sterile operating pad with - 10% deviation of 90x90 cm with opening made of paper, part 33 sterile operating pad with / -10% deviation from 150x120 with opening, part 34strips for measuring glycemia for medising mm 100 device,
CPV Descriptions: Medical consumables

Documents

 Tender Notice

Document_1.docx