Home » Tenders » Americas » USA » Sources Sought for Acquisition of One (1) Robotic Arm with Gripper for Use in... Tender

Sources Sought for Acquisition of One (1) Robotic Arm with Gripper for Use in Laboratory... Tender

Download Documents

DEPT OF DEFENSE has floated a tender for Sources Sought for Acquisition of One (1) Robotic Arm with Gripper for Use in Laboratory Research Automation.. The project location is USA and the tender is closing on 13 May 2024. The tender notice number is W911QX24Q0140, while the TOT Ref Number is 100913251. Bidders can have further information about the Tender and can request the complete Tender document by Registering on the site.

Procurement Summary

Country : USA

Summary : Sources Sought for Acquisition of One (1) Robotic Arm with Gripper for Use in Laboratory Research Automation.

Deadline : 13 May 2024

Other Information

Notice Type : Tender

TOT Ref.No.: 100913251

Document Ref. No. : W911QX24Q0140

Competition : ICB

Financier : Self Financed

Purchaser Ownership : Public

Tender Value : Refer Document

Purchaser's Detail

Name :Login to see tender_details

Address : Login to see tender_details

Email : Login to see tender_details

Tender Details

Description

A. Objective:

To find sources that are qualified to meet the supplies/services as listed in section 11B. Note that the specific requirements in section C are subject to change prior to the release of any solicitation.

B. Salient Characteristics:

Must be a six (6) axis robot arm with a working radius of no more than 900 millimeters (mm). Must not weigh more than 25 kilograms (kg). Must contain at least one (1) Universal Serial Bus (USB) two-point-zero (2.0) and one (1) USB three-point-zero (3.0) ports to allow connectivity to other electronic devices to retrieve data. Must have a payload of no less than five (5) kg. The platform must contain a no-code solution, Graphical User Interface (GUI)-based operation, connected via cable to robotic arm with cable length of at least four-point-five (4.5) meters. If robotic arm contains Bluetooth capability, it must be able to be turned off while robotic arm is in use. Must have Joint range +/- 360 degrees for wrist joint, elbow joint, shoulder joint, and base joint. Must have Pose Repeatability: +/- zero-point-zero three (0.03) mm, with payload, per International Organization for Standardization (ISO) 9283 or better. Must have operational temperature range of 0-50°Celcius. Must have force sensing precision of at least three-point-five (3.5) Newton (N) with accuracy of at least four (4) N. Must have torque sensing precision of at least zero-point-two (0.2) Newton meter (Nm) with accuracy of at least zero-point-three (0.3) Nm. Must comply with European Standard (EN ISO) 13849-1 (Performance Level (PL) D- Category 3) and EN ISO 10218-1. Must have Ingress Protection (IP) classification: IP54; ISO Class Cleanroom: 6 Must comply with Ethernet connectivity to hook up to network. If WiFi capable, it must allow for WiFi to be turned off while in use. Power supply cable must be at minimum six (6) meters in length to support power consumption of approximately 200 watts and no more than 570 watts...
Active Contract Opportunity Notice ID W911QX24Q0140 Related Notice Department/Ind. Agency DEPT OF DEFENSE Sub-tier DEPT OF THE ARMY Major Command AMC Sub Command ACC Sub Command 2 ACC-CTRS Sub Command 3 ACC-APG Office W6QK ACC-APG ADELPHI
General Information
Contract Opportunity Type: Sources Sought (Original)
All Dates/Times are: (UTC-04:00) EASTERN STANDARD TIME, NEW YORK, USA
Original Published Date: May 06, 2024 01:16 pm EDT
Original Response Date: May 13, 2024 12:00 pm EDT
Inactive Policy: 15 days after response date
Original Inactive Date: May 28, 2024
Initiative: None

Classification
Original Set Aside:
Product Service Code: 6640 - LABORATORY EQUIPMENT AND SUPPLIES
NAICS Code: 333248 - All Other Industrial Machinery Manufacturing

Place of Performance: Aberdeen Proving Ground, MD 21005 USA