Supply, Delivery and Installation of Both Fabricated and Medical Equipment for 3... Tender

Procurement Summary

Country : Uganda

Summary : Supply, Delivery and Installation of Both Fabricated and Medical Equipment for 3 Ambulances

Deadline : 04 Oct 2021

Other Information

Notice Type : Tender

TOT Ref.No.: 57194319

Document Ref. No. : UGA180371T-10035

Competition : ICB

Financier : Other Funding Agencies

Purchaser Ownership : -

Tender Value : Refer Document

Purchaser's Detail

Name :Login to see tender_details

Address : Login to see tender_details

Email : Login to see tender_details

Login to see details

Tender Details

Tenders are invited for Supply, Delivery and Installation of Both Fabricated and Medical Equipment for 3 Ambulances
1000/2000W Inverter
The converter must be able to use
normal up to 240V electrical devices in
Car. Please note this inverter must be
connected to a 12V battery.
LCD Multifunction Display:
1.Battery mode
2. Battery voltage: digital display
3. Battery level indicator
4. Voltage display: output voltage of the inverter
5.Output waveform (sine wave)
6. Show watts
Low Battery Alarm (nominal): 9.5 - 11.0V
Low Battery Shutdown Point (nominal): 9.0 - 10.5V
High Battery Shutdown Point (nominal): 14.5 - 15.5V
Protection Properties:
Soft start function, High temperature protection, High voltage
protection
Low voltage protection, Short circuit protection, AC Overload
protection
Overcurrent protection, Dimensions 9.3 x 12.4 x 4.7 inches or
better. Condition: A brand-new, unused, unopened, undamaged
item in its original packaging. Power: 1000W/2000W, Output
Waveform: Pure Sine Wave, Output Frequency (Nominal): 60 Hz
or better. Efficiency: 90% Or better, Operating Temp: -4°F -
158°F
System Configuration: Off-Grid, No Load Current Draw: 1a
power source: automobile battery, continuous power: 1000w,
surge power: 2000w wire gauge: 4 awg. ac output voltage
range: 115vac/240vac, operators manual, and applicable
certifications.
no. 3
2
"siren, communication and beacon lights
beacon lights
no. 3
led light bar 55w with siren and dual speaker in built 200w
6 pcs 1.5w led-12 strobe light on front
6 pcs 1.5w led-12 strobe light on rear
2 pcs 23w halogen directional light on lane
pc dome coating
working voltage dc 12v, power 200w,
working current 4.5a, fuse 20a,
protection level ip65, lamp shade hardness 4h,
more than 90% transparency,
colour red, blue, amber, clear, green.
ambient temp: 20-55 degrees c, weight: 12-17kg,
dimensions: lxwxh: 1120x405x265mm
• sound: siren with wail, yelp and phaser tones or better.
• red and blue flashes or better.
internal radio communication:
between driver and patient attendant
3
"220v sockets 2 way, 2 gang,
to be fixed inside the patient compartment.
standard grounding wall socket
rated current: 10a
ip rating: ip68
2 gang
voltage: 240v
color: white
panel material: high quality pc
inside material: high quality brass and pc"
no. 6
4
"patient cabin round led lights 15w
ultra-thin led spot light.
material: aluminium
working voltage: 12 v dc
light size: 68 x 68 x 55 mm this can vary due to design
installation hole: hole cut φ2.25-2.5inchs (57-63mm) this can
vary due to design
led chips: 15 pieces or better
color: warn white 3000k
cable length: 200 cm (78.74 inches)
weight: 10.58 oz. (300g) this can vary due to design
wire length: 78.74 inches(2 m)"
no. 6
5
"rear ac independent system
a universal 12v air conditioner hvac
system control module panel
to be fixed on the vehicle's main ac system,
no. 3
with a 36 pass 4 way or better configuration"
6
"oxygen regulator, (under normal temperature and pressure),
adoptable to cylinder and
flowmeter/flow gauge with
maximum capacity of at least 15 l/min "
no. 6
7
"flow meter wall mounts, 200kg/cm2 pressure,
input pressure: 15mpa/20mpa
output pressure: 0.2-0.3mpa
automatic discharge pressure of the safety valve: 0.35+_0.05mpa
the range of flow: 1-15l/min
connection thread: g5/8/cga540/w21.8/g3/4
main body: brass
humidifier bottle: 200ml
unit colors: white/green/blue are available
structure: piston type
packing: 10pcs/ctn (color box)
dimension: 52x44x18cm or better
must depend on provided regulator."
no. 6
8
"flow meter outlet
these are wall sockets/
plugs for adoption of oxygen flow meter.
accepts gas specific adapters,
approved 100% pressure testing of each outlet
and cleaned for medical gas service
must be indexed to eliminate interchangeability of gas services
up to 1″ (25 mm) wall thickness adjustment
360-degree swivel inlet pipe for easy installation
universal rough-in assembly to accept quick disconnects or diss
front adaptors (can be interchanged at any time)
must depend on provided regulator/flow meter."
no. 6
9
"medical examination/diagnostic light.
light beam shall be adjustable and
able to widen and narrow
with the push/pull of the stem.
must feature an adjustable gooseneck to
point light to where you need it most
nickel finish with gold/silver/chromium trim on light head "
no. 3
10
"stretcher bed platform
(to allow proper patient and
scoop loading), 203x570x120mm
made of high-strength aluminium
alloy material.
the extension board,
no. 3
must be designed to be rolling-over.
it adapts to the ambulance chassis height.
the base will be locked automatically
when the stretcher is moved into it.
the base using new fixing device in the front and back adopts the
double layer design.
must allow scoop stretcher to be deposited in the bottom."
11
"seat belt cutter/life hammer
emergency tool/screen
breaker, 173x66mm with double ended
break hammer.
seat belt cutter, and plastic or mettalic handle.
holding bracket with192x75mm."
no. 3
12
"courtesy light/spotlight for
patient loading lighting.
ac120-240vac or 12v/24vdc,
with 100-110lm/w lumen,
frequency: 50hz/60hz
dimensions Φ235*260mm or better,
with 10°30°60°120° beam angle."
no. 3
13
"grill ambulance led flasher
lights.
type: led strobe light
size: 4x3 or better spec
led qty: 6pcs
voltage: dc12v
optional beam: spot/flood
no. 6
14 pneumatic connections as per fixed oxygen cylinders ws. 3

Documents

 Tender Notice