Supply of Drill Bits Tender, Azerbaijan - 67161711

Procurement Summary

Country : Azerbaijan

Summary : Supply of Drill Bits

Deadline : 27 Jun 2022

Other Information

Notice Type : Tender

TOT Ref.No.: 67161711

Document Ref. No. : 26001-22

Competition : ICB

Financier : Self Financed

Purchaser Ownership : Public

Tender Value : Refer Document

Purchaser's Detail

Name :Login to see tender_details

Address : Login to see tender_details

Email : Login to see tender_details

Login to see details

Tender Details

Tenders are invited for Supply of Drill Bits

Tricone drill bit 76 mm (3”)
ea.
7
Standard : API-7-1 (GOST 20692-2003)
IADC code: 321
Type of drilled formations: hard
Support type: open
Supply: milling steel cutters
Axial load: 50-80 kN
Rotational speed:100-40 rev/min
Type: Tricone
Washing system: central port
Connection thread: nipple1- ½ Reg (Z-42)
2
Tricone drill bit 93 mm (3 21/32”)
ea.
15
Standard : API-7-1 (GOST 20692-2003)
IADC code: 321
Type of drilled formations: hard
Support type: open
Supply: milling steel cutters
Axial load: 60-110 kN
Rotational speed: 100-40 rev/min
Type: Tricone
Washing system: central port
Connection thread: nipple 2- 3/8 Reg (Z-66)
3
Tricone drill bit 95.3 (3 3/4”)mm
ea.
9
Standard : API-7-1 (GOST 20692-2003)
IADC code: 321
Type of drilled formations: hard
Support type: open
Supply: milling steel cutters
Axial load: 40-100 kN
Rotational speed: 100-40 rev/min
Type: Tricone
Washing system: central port
Connection thread: nipple2- 3/8 Reg (Z-66)
4
Tricone drill bit 98.4 (3 7/8”) mm
ea.
14
Standard : API-7-1 (GOST 20692-2003)
IADC code: 321
Type of drilled formations: hard
Support type: open
Supply: milling steel cutters
Axial load: 60-110 kN
Rotational speed: 100-40 rev/min
Type: Tricone
Washing system: central port
Connection thread: nipple2- 3/8 Reg (Z-66)
5
Tricone drill bit 114.3 (4 1/2”) mm
ea.
6
Standard : API-7-1 (GOST 20692-2003)
IADC code: 321
Type of drilled formations: hard
Support type: open
Supply: milling steel cutters
Axial load: 60-120 kN
Rotational speed: 600-40 rev/min
Type: Tricone
Washing system: central port
Connection thread: nipple2- 3/8 Reg (Z-66)
6
Tricone drill bit 132 mm (5 13/64”)
ea.
8
Standard : API-7-1 (GOST 20692-2003)
IADC code: 321
Type of drilled formations: hard
Support type: open
Supply: milling steel cutters
Axial load: 70-140 kN
Rotational speed: 600-40 rev/min
Type: Tricone
Washing system: central port
Connection thread: nipple 2- 7/8 Reg (Z-76)
7
Tricone drill bit 139.7 mm (5 1/2”)
ea.
25
Standard : API-7-1 (GOST 20692-2003)
IADC code: 216
Type of drilled formations: Medium hard
Support type: hermetically sealed, filled with grease
Supply: milling steel cutters
Axial load: 60-150 kN
Rotational speed: 300-40 rev/min
Type: Tricone
Yuma sistemi : Washing system: 3-port or hydromonitor side port
Connection thread: nipple3- ½ Reg (Z-88)
8
Single roller cone drill bit 139.7 mm (5 1/2”)
ea.
20
Standard : API-7-1 (GOST 20692-2003)
IADC code: 547
Type of drilled formations: Medium hard
Support type: hermetically sealed, filled with grease
Supply: hard alloy cutter
Axial load: 110 kN
Rotational speed: 100-40 rev/min
Tipi: 1 şaroşkalı
Washing system: central port
Connection thread: nipple 3- ½ Reg (Z-88)
9
PDC 139.7 mm (5 1/2”) drill bit
ea.
55
Standard : API-7-1 (GOST 20692-2003)
IADC code: M333
The drill bits shall be equipped with anti-vibration cutters, reverse-rotating cutters, and special cutters protecting the diameter of the drill bit
Type: Matrix type, 3 main blades and 3 semi-blades.
Nozzles: threaded, must not be not less than 3.
Cutters: 13 mm
Connection thread: nipple 3- ½ Reg (Z-88)
Application: directional drilling
Can be applied with rotor and BHA.
Note: Bit breaker, one additional set of nozzles of different sizes, 1 ea. nozzle wrench for each drill bit, one gauge pad for each drill bit matching with the drill bit diameter shall be submitted together with a drill bit.
Lot № 2 (Tricone drill bit) (“Complex drillingg works” trust)
1.
Tricone 444, 5
ea.
5
Standard : API-7-1
IADC code: 115 API / for soft formations
Operating resource limit: not less than 1 100 000 rotations, axial load: 2-25 ton, Number of operating cycles: able to work with 50-200 rev/min speed, with central washing port, equipped with gaskets that allow working in hydrocarbon-based drilling mud, with gasket, ball bearing and diameter protector
Type: Tricone
Connection thread: nipple 7 5/8 Reg.
Standard : API-7-1
Nozzles: threaded, must not be not less than 4
Application: directional and vertical drilling
Can be operated with rotor and downhole motor
2.
Tricone 215, 9
ea.
3
Standard : API-7-1
IADC code: 117 API / for soft formations
Operating resource limit: not less than 600000 rotations, axial load 2-15 ton, number of operating cycles, able to work with 50-150 rev/min speed, with central washing port, equipped with gaskets that allow working in hydrocarbon-based drilling mud, with gasket, ball bearing and diameter protector
Type: Tricone
Nozzles: threaded, must not be not less than 3
Connection thread: nipple 4 1/2 Reg
Application: directional and vertical drilling
Can be operated with rotor and downhole motor
3.
Tricone 311, 1
ea.
5
Standard : API-7-1
IADC code: 117 / for soft formations
Made of wear-resistant special material, weight on bit 4-20 ton, able to work with 50-200rev/min speed, equipped with gaskets that allow working in hydrocarbon-based drilling mud, yumşaq-orta süxurlarda istifadə oluna bilən olmalı, with gasket, ball bearing and diameter protector.
Type: Tricone drill bit, with central orifice
Nozzles: threaded, must not be not less than 4.
Connection thread: nipple6 5/8 Reg API
Application: directional drilling
Can be operated with rotor and downhole motor
4.
Tricone 152, 4
ea.
5
Standard : API-7-1
IADC code: 217 / for medium hard formations
Made of wear-resistant special material, weight on bit 2-10 ton, able to work with 50-150 rev/min speed, equipped with gaskets that allow working in hydrocarbon-based drilling mud, can be used for drilling of medium soft formations, with gasket, ball bearing and diameter protector.
Type: Tricone
Nozzles: threaded, must not be not less than 3 .
Connection thread: nipple3- ½ Reg API
Application: directional drilling
Can be operated with rotor and downhole motor
5.
Tricone 142, 875
ea.
6
Standard : API-7-1
IADC code: 117 / for soft formations
Made of wear-resistant special material, operating resource limit: not less than 300000 rotations, weight on bit 3-8 ton, with gasket, ball bearing and diameter protector.
Type: Tricone
Nozzles: threaded, must not be not less than 3- .
Connection thread: nipple3- ½ Reg
Application: directional and vertical drilling
Can be operated with rotor and downhole motor
6.
Tricone
215, 9
ea.
3
Standard : API-7-1
IADC code: 217 API / for medium hard formations
Operating resource limit: not less than 550000 rotations, axial load: 2-15 ton, Number of operating cycles: able to work with 50-150 rev/min speed, with central washing port, Equipped with gaskets that allow working in hydrocarbon-based drilling mud,
With gasket, ball bearing and diameter protector
Type: Tricone
Connection thread: nipple 4 1/2 Reg.
Nozzles: threaded, must not be not less than 3
Application: directional and vertical drilling
Can be operated with rotor and downhole motor
7.
Tricone
190, 5
ea.
3
Standard : API-7-1
IADC code: 217 API / for medium hard formations
Operating resource limit: not less than 550000 rotations, axial load: 2-15 ton, Number of operating cycles: able to work with 50-150 rev/min speed, with central washing port, Equipped with gaskets that allow working in hydrocarbon-based drilling mud,
With gasket, ball bearing and diameter protector
Type: Tricone
Connection thread: nipple 4 1/2 Reg.
Nozzles: threaded, must not be not less than 3
Application: directional and vertical drilling
Can be operated with rotor and downhole motor
Lot № 3 (PDC type drill bits) (“Complex drilling works” trust)
1.
PDC 311, 1
ea.
4
Standard : API-7-1
IADC code: M223 / for soft formations
The drill bits shall be equipped with anti-vibration cutters, reverse-rotating cutters, and special cutters protecting the diameter of the drill bit.
Type: PDC type, matryx body, with 6 blades made under specific conditions.
Connection thread: nipple 6 5/8Reg.
Kəsici dişlər: 16 mm
Nozzles: threaded, must not be not less than 6-dan az olmamalı
Application: directional and vertical drilling
Can be operated with rotor and downhole motor
2.
PDC 374, 65
ea.
1
Standard : API-7-1
IADC code: M223 / for soft formations
The drill bits shall be equipped with anti-vibration cutters, reverse-rotating cutters, and special cutters protecting the diameter of the drill bit.
Type: PDC type, matryx body, maili qazma dizaynlı, with 6 blades, made under specific conditions.
Connection thread: nipple 7 5/8Reg.
Kəsici dişlər: 16 mm.
Nozzles: threaded, must not be not less than 6.
Application: directional and vertical drilling
Can be operated with rotor and downhole motor
3.
PDC 139, 7
ea.
2
Standard : API-7-1
IADC code: M333 / for soft - medium hard formations
The drill bits shall be equipped with anti-vibration cutters, reverse-rotating cutters, and special cutters protecting the diameter of the drill bit.
Type: PDC type, matryx body, with 3 main blades and 3 semi-blades, made under specific conditions.
Nozzles: threaded, must not be not less than 3- .
Connection thread: nipple 3 ½ Reg.
Cutters: 13mm
Application: directional drilling
Can be operated with rotor and downhole motor
4.
PDC 142, 875
ea.
7
Standard : API-7-1
IADC code: M333 / for soft - medium hard formations
The drill bits shall be equipped with anti-vibration cutters, reverse-rotating cutters, and special cutters protecting the diameter of the drill bit. Abrasion resistant, thermally stable,
Type: PDC type, matryx type, for direction drilling, with 5- 6 blades, made under specific conditions.
Nozzles: threaded, must not be not less than 6.
Connection thread: nipple 3- ½ Reg
Cutters: 13mm
Application: directional drilling
Can be operated with rotor and downhole motor
5.
PDC 215, 9
ea.
3
Standard : API-7-1
IADC code: M223 / for soft formations
The drill bits shall be equipped with anti-vibration cutters, reverse-rotating cutt

Documents

 Tender Notice