Supply, Installation, Testing and Commissioning of Lifts at Kemsa New Warehouse Tender

Procurement Summary

Country : Kenya

Summary : Supply, Installation, Testing and Commissioning of Lifts at Kemsa New Warehouse

Deadline : 04 Oct 2022

Other Information

Notice Type : Tender

TOT Ref.No.: 71865982

Document Ref. No. : GF-KEMSA/CONST 03/ONT 01/2022/2023

Competition : ICB

Financier : Self Financed

Purchaser Ownership : Public

Tender Value : Refer Document

Purchaser's Detail

Name :Login to see tender_details

Address : Login to see tender_details

Email : Login to see tender_details

Login to see details

Tender Details

Tenders are invited for Supply, Installation, Testing and Commissioning of Lifts at Kemsa New Warehouse

a1.01 Lift Nomenclature
a1.02 Type of Lift
a1.03 Special Requirements
a1.04 No Of Lifts
a1.05 Configuaration
a1.06 Capacity (Occupancy)
a1.07 Capacity (Weight)
a1.08 Travel (m)
a1.09 No. of Stops / openings (Installed)
a1.10 No. of Stops / openings (Configured)
A2 DRIVE SPECIFICATIONS
a2.01 Drive (Motor) System
a2.02 Engine Type
a2.03 Speed (m/s) - Minimum
a2.04 Acceleration (m/s) - Min
A3 SHAFT SPECIFICATIONS
a3.02 Existing Pit Depth
A4 CABIN SPECIFICATIONS
a4.01 Car (Cabin) Access
a4.02 Car (Cabin) Height
a4.03 Car (Cabin) Height - Internal Clear
a4.04 Car Fit-Out Decoration Allowance
a4.05 Car Floor Finish Allowance
a4.06 Car Walls Finish Allowance
a4.07 Car Floor Display Position
a4.08 Car Ventillation
a4.09 Car Lighting
a4.10 Buffer rails
LIFT 2 - GOODS / PASSENGER
2No. Fans Min.
LED
Required
1No. Simplex
1No. SIMPLEx SHAFT
W =2500mm
1No. Access
2600mm 2600mm
2400mm
W =2500mm
D = 3000mm
1No. Access
Factory Fitted
Factory Fitted
On COP (Top)
3 Stops
Machine room-less
VVVF
1.0m/s
0.6m/s
1No. SIMPLEx SHAFT
Factory Fitted
Factory Fitted
Factory Fitted
1No. Simplex
ITEM DESCRIPTION
LIFT 1 - PASSENGER
LIFT DETAILS
a3.01 Existing Shaft Dimensions
D = 3000mm
VVVF
1.0m/s
2 Stops
Machine room-less
7.5m
2 Landings
Conventional
Hoist
Normal
1No.
26 Pax
3 Landings
26 Pax
2000 Kgs
1No.
Conventional
Passenger
2000 Kgs
10.5m
Normal
0.6m/s
D = 1500mm D = 1500mm
2No. Fans Min.
Required
LED
Factory Fitted
On COP (Top)
2400mm
Page 2 of lift schedules September, 2022
Proposed KEMSA Warehouse Offices - Lift BQ
A5 DOOR SPECIFICATIONS
a5.01 Door Opening Type
a5.02 Door Operations / Hour (Minimum)
A5.04 Landing Floor Display Position
A5.05 Landing Movement Indication Position
A6 LANDING OPERATING PANEL
a6.01 Landing Operating Panel Position
a6.02 Type of Buttons
a6.03 Finish on Buttons
a6.04 Braille Input on Buttons
a6.05 Buttons Illumination
a6.06 Arrival Gong Sound
A7 CAR OPERATING PANEL
a7.01 Car COP 01 Position
a7.02 Car COP 02 Position
a7.03 Type of Buttons
a7.04 Buttons Finish
a7.05 Braille Input on Buttons
a7.06 Buttons Illumination
a7.07 Key Switch
a7.08 Alarm Button
a7.09 Close Door Button
a7.10 Open Door Button
a7.11 Arrival Gong & floor announcement
a7.12 Intercom Speaker
A8 OPERATION FUNCTIONS
a8.01 Anti Disturbance Function
a8.02 Bypass Overload
a8.03 Cabin Overload Indication
a8.04 Landing Overload Indication
a8.05 Force Closing
a8.06 Advance Door Opening (ADO)
Required
Required
a8.07 Automatic Power Off in Idle Mode
a8.08 Car Call Cancellation
a8.09 2nd Car Operating Panel (COP)
a8.10 Dynamic dispersion standby
a8.11 Releveling
a8.12 Attendant Service / Manual Operation
a8.13 Door Holding Button
a8.14 Door closing time protection
a8.15 Door opening time protection
a8.16 Service floor setting
a8.17 Non-stop service
a8.18 Energy saving mode in main landing
a8.19 Cabin Air Conditioning
a8.20 Cabin Air Purification
a8.21 Air pressure control system
a8.22 Automatic damping system
A9 SAFETY FUNCTIONS
a9.01 ARD (Automatic Rescue Device) for
Power failure
a9.02 Counter-weight Safety Gear
a9.03 Door light curtain protection/Sensor
a9.04 Cabin Emergency Light
a9.05 Pre-load starting torque
a9.06 Emergency Power Operation
a9.07 Emergency alarm function
a9.08 Earthquake Protection
a9.09 Anti-burglar Function
a9.10 Access Control System
Required
Required
Not Required
None but Provisions to be in place for future

ITEM DESCRIPTION
LIFT DETAILS
LIFT 1 - PASSENGER LIFT 2 - GOODS / PASSENGER
Page 4 of lift schedules September, 2022
Proposed KEMSA Warehouse Offices - Lift BQ
A10 COMMUNICATION FUNCTIONS
a10.01 Intercom System
a10.02 Arrival Gong & floor announcement
a10.03 EVAC/ Background music
a10.04 Arrival Lamp
a10.05 Cabin Lift Floor Number Indication
a10.06 Landing Lift Floor Number & Direction
Indication
a10.07 Voice announcement
a10.08 Fire Evacuation
a10.09 BMS Interface
a10.10 CCTV Provision & Cabled
a10.11 Speakers Provision & Cabled
a10.12 Cabin Multi-media Information System
A11 FIRE FIGHTING FUNCTIONS
a11.01 Automatic return to pre-setted floor in
case of fire (automatic homing)
a11.02 Second Homing
a11.03 Fireman Operation
A12 GROUP CONTROL FUNCTIONS
a12.01 Group Control
a12.02 Control mode Automatic switch
a12.03 Peak hour Control function
a12.04 Group conrol backup operation
a12.05 Learning Function
a12.06 Lift Monitoring

The Tender validity period shall be One Hundred & Twenty (120) days.

Tender shall provide a Tender Security: The type of Tender security shall be in the amount of Kenya shillings Three Hundred and Fifty Thousand (Ksh.350, 000.00)

Documents

 Tender Notice