Supply of Radio Studio Equipment Tender, South Sudan - 64491193

Procurement Summary

Country : South Sudan

Summary : Supply of Radio Studio Equipment

Deadline : 30 Mar 2022

Other Information

Notice Type : Tender

TOT Ref.No.: 64491193

Document Ref. No. : RFQ0047

Competition : ICB

Financier : United States Agency for International Development (USAID)

Purchaser Ownership : Public

Tender Value : Refer Document

Purchaser's Detail

Name :Login to see tender_details

Address : Login to see tender_details

Email : Login to see tender_details

Login to see details

Tender Details

Quotation are invited for Supply of Radio Studio Equipment

1. 1 Piece Digital FM Transmitter 500 watts (minimum), digital FM transmitter
(Direct Digital Synthesis [DDS]), compact
(under 20 kgs), able to operate in temperatures
up to 45 degrees Celsius, low power
consumption model preferred, web interface for
monitoring and programming the transmitter,
7/16 DIN female RF output conductor.
2. 1 Set Dipole Antenna System Two pieces of 500-watt, omni-directional dipole
FM antenna including splitter, with antenna gain
of 4 dB minimum.
3. 1 Set Audio Processor 4 bands; 24-bit, sample rate up to 92 kHz
(minimum) for both outputs and inputs;
Differential Outputs; analog and digital audio
inputs; able to operate in temperatures up to 45
degrees Celsius - must include data sheet for
proposed equipment; Digital AES/EBU/optical
inputs and outputs; AES/EBU standard, 24-bit
resolution. Input and output should be
analogue and digital for both models. IO
system.
4. 1 Piece Server Rack To hold Transmitter and Audio Processor
5. 1 Piece Radio Broadcast Mixer 8 channels (minimum), 2 x mobile (sim card, not
VoIP) communication channel, xLR inputs,
headphone/audio jack
6. 4 Sets Headphones Around-the-ear closed design, circumaural ear
coupling; 3.5- and 6.3-mm jack plug, sound
7. 1 Piece Headphone Amp “Four out” - Capable of splitting signal to four
sets of headphones.
8. 4 Pieces Dynamic Microphone Output Impedance in the range between 50 Ω
and 400 Ω, xLR output, built-in pop filter,
sensitivity under 2 mV/Pa.
9. 4 Pieces Microphone Table
Stands
Stands to accompany (and appropriate) for the
microphones provided above.
10. 1 Set Studio Monitor 1 set (two speakers), approximately 5 inch,
minimum max SPL of 100 db. High end of the
frequency range must be at least 20KHz; xLR
jack.
11. 8 Pieces xLR Cables 4-meter, male-female cables (microphones to
mixer)
12. 2 Pieces 6.35mm Cable ¼ inch TS Male 6.35mm Phono Jack Straight
Plug, 6 feet long (mixer to headphone amp)
13. 2 Pieces xLR Cables 6-meters, male-female cables (mixer to audio
processor)
14. 1 Piece BNC Cable 50 Ohm, .5-meter-long BNC/BNC male (audio
processor to transmitter)
15. 1 Piece Coaxial Feeder Cable
(Antenna Cable)
80-meters, ½ inch diameter, connector 7/16
DIN (transmitter to antenna)
16. 1 Set Lighting Protection Grounding kit for feeding cable (1/2 inch)
17. 1 Piece Hoisting Grip Cable ½ inch
18. 1 Piece Cable clamp Stainless steel
19. 1 Roll Tape Self-amalgamating vulcanizing tape - 10
meters

Documents

 Tender Notice